|
In the lower/trigger box, check for a cross-pin that is not seated properly.
Also check for a bent/binding spring. It can be as simple as the hammer spring slipping between the hammer and trigger box jamming.
Check the pin that holds the roller in place on the hammer. It is a common issue on the M4/SCAR/G36 platform. If not perfectly in, put a drop of superglue in the recessed side and put back properly. Wipe the excess right away so it does not creep in the roller and bind everything.
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|