[ILLusion]

Originally Posted by p.phresh

I have a strike warrior which uses a detonics BBH, I'll try and get some pics tonight.

However, I don't think there is much difference between the two. Have you already tried to fit the standard 1911/2011 BBH in the detonics slide? From what I recall they are similar. It even has the threaded hole on the top of the BBH for the screw in the hicapa sights.

Actually, this information is incorrect. The blowback unit in the Detonics is significantly different from the Hi-Capa version, and without extremely heavy modifications (with risk of turning the piece in to garbage), you will not be able to get one to fit the other.

I have a spare unit inbound.

Originally Posted by dnazero

Hi All,

I have recently broke my stock nozzle. And I have purchased SD POM nozzle set. When I got my nozzle in hand I have check carefully and notice the thing is not even in proper circle. I am not sure if I am having a defective nozzle or it is normal that they came in oval. I am comparing it with the stock nozzle, really got no idea how it can provide a good seal.

I have purchased it since it was highly rated and recommended in the thread. Please let me know if this is normal or I am being too paranoid.

Thank you and highly appreciated for the help.

You received a defective product. Get an exchange.

Originally Posted by Bobby Lemain

If my loading nozzle is so worn down that it doesn't get pulled forwards by the hop unit, could that cause FPS drops and occasional venting upon insertion of a fresh mag?

edit: I tried supergluing a square of paper to the bottom of the nozzle that follows the hop unit and.... no more venting! I guess I need to replace it then

It doesn't have to get pulled forward by the hop up unit. The normal pneumatic function of the gun will force it to reach full extension. It doesn't require the hop up rubber to do that for it.

Originally Posted by raiderZY

Quick question
How many bbs can a Tokyo marui 1911 shoot with a single fill?

I've been able to get about 2 mags worth, on a fairly quick rapid fire.

Originally Posted by Slono

My nine ball dyna piston head has blown 2 orings. Does this happen to anybody else?

I've been getting this more recently with 1911's. Not sure why... but I've swapped a couple of customer's setups to cup designs or non-vented o-rings, and they haven't had problems since.