Quote:
|
Originally Posted by lamlok
In HK, the mainstream Mech box mod is to use 8mm bearings for high powered guns.
The large diameter bearing gives both sturctural and friction advantages. Is it common to see guns in excess of 500ft/sec while having 25+ shot/sec.
Of course during the mod, the slightest misalignment will totally ruin the gearbox. I've seen too many DIY failure. Only the most experienced gunsimth will be able to perform such mod.
|
Congrat's on diggin up a thread that has been dead for half a year +.
We won't have such a problem cause we DON'T use AEG's that shoot 500fps+.
Welcome to asc, try not to awaken too many threads that are dead. :wink: