Recently, i acquired a KSC GLock 18c that was called a "fixer" and i understood fully that this would be some work to get this fixed.
When purchase the hammer assembly was all in pieces and was missing one spring(Part82)...that's fine since you can still purchase all the springs that go into this glock.
Last week i received the springs that i purchased from ehobby and started to put everything back together. After hours of watching videos and reading manual i have gotten the thing together BUT, it does not fire. Hopefully but these pictures someone can diagnose my problem.
Hammer upright(Trigger unmovable)
Hammer Fully back(Trigger moveable)
Hammer Assembly removed out of the lower but attached by Part 92(Also came with an extra Part 266).
ANY help with be appreciated. Willing to EMT if i can get this fixed.