Hey peoples, was getting ready for a game this Saturday and made this, thought some might find it useful.
I put my radio in the front pouch for easy access, but everyone knows buttons get pressed.
I started with one of those dollar store cutting boards that are really thin.
1. Cut out what you thinnk is the size of your mag pouch.....or you can measure
106_0003.JPG
2. The end of the skinny peice should look like an arrow
106_0004.JPG
3. On the opposite side, in line with your arrow, cut a long straight line not too far from the edge. Make sure that it is slightly smaller than the arrow so the edges can grab.
106_0005.JPG
4. The entire peice should look just like this......or better if you take your time and measure and shit.
106_0006.JPG
5. Take the arrow and put it in the slot
, the tips of the arrow should keep the skinny part from pulling out
106_0007.JPG
6. The top of the completed tube should look like this.
106_0009.JPG
7. Insert the tube with the skinny part in the back like this.
106_0010.JPG
8. Put your radio in.
106_0011.JPG
9. Close the flap.
106_0012.JPG
10. To prevent hang-up on a sling or any other gear or equipment, tuck your antenna under your admin pouch if you got one.
106_0013.JPG
ooooolalalala