Airsoft Canada - View Single Post

Con Murder · September 28th, 2009, 03:56

First off I got the JG M4-S for my bro this spring.

The front sight was not true when I recieved it (not his fault, I'll explain later) but the stock was nice and tight. Using an allen key you can adjust the whole outer barrel or just the sight, I set the barrel as that was what had wobbled. After tightening no more problems with it getting loose.
The package had not been treated well by CP, this led to the but plate being to loose as well and needing to be reset (only after I thought I stripped gears!!).
I say the package was mistreated because of the shape the box was in and the .2 bbs everywhere inside (broken bag). Entirely out of VA's hands so thats nothing to worry about.

I purchased the very hot A version and have yet to break anything, but it needs a sorbo to ease the load a bit. As far as I'm concerned switch to mid or low capacity mags to avoid any possible feed issues.

September 28th, 2009, 03:56	#15
Con Murder Trader rating Join Date: May 2009 Location: Lethbridge Alberta Canada	First off I got the JG M4-S for my bro this spring. The front sight was not true when I recieved it (not his fault, I'll explain later) but the stock was nice and tight. Using an allen key you can adjust the whole outer barrel or just the sight, I set the barrel as that was what had wobbled. After tightening no more problems with it getting loose. The package had not been treated well by CP, this led to the but plate being to loose as well and needing to be reset (only after I thought I stripped gears!!). I say the package was mistreated because of the shape the box was in and the .2 bbs everywhere inside (broken bag). Entirely out of VA's hands so thats nothing to worry about. I purchased the very hot A version and have yet to break anything, but it needs a sorbo to ease the load a bit. As far as I'm concerned switch to mid or low capacity mags to avoid any possible feed issues. __________________ Con Murder Dark Rhino L.A. Airsoft Last edited by Con Murder; September 28th, 2009 at 03:59..