Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   CA249 vs Top / Star M249s (https://airsoftcanada.com/showthread.php?t=28417)

Zekk05 September 12th, 2006 14:03

CA249 vs Top / Star M249s
 
Before you jump the gun, this thread isnt another one asking which one is better. I am already a proud owner of a CA249 and have had many games with my baby. Unfortunatly, the gun has taken its fair share of abuse and requires some replacement parts.

The question here is, when it comes to purchasing parts for the CA249, which ones will fit? Most parts have descriptions "249 sight for TOP m249", etc.. I know that not all three guns are made exactly the same, so which model (Star or TOP) is closest to the CA249 and thus could be used to get replacement parts.

Hope that wasnt too confusing,
Thanks

Gryphon September 12th, 2006 14:17

It would be more helpful if you described the parts you need to replace. Most parts are specific to their individual brands though there are exceptions.

Zekk05 September 12th, 2006 18:54

suppose so. was just hoping to hear that ALL top or ALL star parts will fit the CA.

Im lookin to replace the front sights.

thephenom September 12th, 2006 21:10

Quote:

Originally Posted by Zekk05
suppose so. was just hoping to hear that ALL top or ALL star parts will fit the CA.

Im lookin to replace the front sights.

That's a lot of parts to list out...

Zekk05 September 13th, 2006 02:13

Quote:

Originally Posted by thephenom
Quote:

Originally Posted by Zekk05
suppose so. was just hoping to hear that ALL top or ALL star parts will fit the CA.

Im lookin to replace the front sights.

That's a lot of parts to list out...

you so funnnnnny.

because every other part on the aeg is gonna last the entire lifetime and will never break, thus its pointless to know if others are interchangable as well!

Gryphon September 13th, 2006 10:00

The front sights should be interchangable. You're talking strictly about the dovetailed tower and not the entire gas block, right?

Zekk05 September 13th, 2006 10:44

correct, although it would be nice if the entire thing would be interchangable.

but in general, im referring to most replacement parts (externally, that is)
Some part descriptions ive read are clear in saying "for STAR 249 only" etc

MMMiles! September 13th, 2006 19:00

Quote:

Originally Posted by Zekk05
Quote:

Originally Posted by thephenom
Quote:

Originally Posted by Zekk05
suppose so. was just hoping to hear that ALL top or ALL star parts will fit the CA.

Im lookin to replace the front sights.

That's a lot of parts to list out...

you so funnnnnny.

because every other part on the aeg is gonna last the entire lifetime and will never break, thus its pointless to know if others are interchangable as well!

Different manufacturers are often not interchangeable - as someone already said, listing out all the parts of a 249 and what can be swapped with another brand would be a monumental task.

It would be nice if we had that for every gun, but that kind of listing doesn't even exist for guns much more common than 249's, so don't get your hopes up...

Gryphon September 14th, 2006 00:07

If I may be so bold Scott, what the hell did you do to break the front sight tower on a CA249? A STAR, okay. But a CA? Mine nose dived into the dirt along with me during KS2 and didn't even scratch. Are you just unusually hard on your guns or is my unit exceptionally tough?

Oh wow, that last line didn't come out the way I expected at all...

Zekk05 September 17th, 2006 16:40

lol Andrew, we rushed for that tower bunker and I threw the gun through the firing hole. top of the front sight clipped the top of the firing hole and it snapped off at the weak point where the sight slides on to the tower.


All times are GMT -4. The time now is 09:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.