Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   mmmm, dummy question (https://airsoftcanada.com/showthread.php?t=161737)

Aspen_Howler January 20th, 2014 19:46

mmmm, dummy question
 
I'm really new to the airsoft world and the guns. I just bought myself a umarex hk 416 cqb (the gun so far is amazing.) But my dumb question is, I got a g&p 9.6v 1600mah nunchuck battery and a 'valken energy' universal smart charger....do the batteries normally get really hot when charging or am I doing something wrong and am going to explode? :P Thanks for anyone who responds.

SuperCriollo January 20th, 2014 20:05

They are supposed to get hot once they are full

SuperHog January 20th, 2014 20:19

Warm not hot.

L473ncy January 20th, 2014 21:45

Like a warm bath hot not scalding hot.

Also depends on how fast your charger charges. Is there a mAh output rating on the charger?

Aspen_Howler January 20th, 2014 23:43

I can either switch it between .9a or 1.8v. The charger came switched to the 1.8v setting.

ThunderCactus January 20th, 2014 23:44

use the .9a setting, 1.8a is only for larger capacity batteries

Aspen_Howler January 20th, 2014 23:53

Thanks ThunderCactus....I'll give it a try. And thanks everyone for the advice. Hope to get out and play soon ^^

Mr. Gruntsworthy February 19th, 2014 21:05

From my understanding, batteries get hot if they're being overcharged, but I could very well be mistaken.

ThunderCactus February 19th, 2014 22:28

nickel chemistry batteries naturally get hot when charging, and more so during top up
lipo's should not be more than room temperature during charging at any point

Janus February 20th, 2014 00:20

You're charging it too fast. Lower the charging amps.


All times are GMT -4. The time now is 13:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.