Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   VFC Scar Heavy Midcaps (160rd) (https://airsoftcanada.com/showthread.php?t=104461)

antiochus May 19th, 2010 21:39

VFC Scar Heavy Midcaps (160rd)
 
Ordered a 3 pack from WGC shop for my VFC Scar Heavy, Loaded up the mag and it would NOT feed at all. Added silicone oil. Would not feed. Lubed again and filled mags to capacity and let sit for 2 days. Would not feed. Removed spring and cut a few Inches off.Would not feed.Scratched my head...removed spring from mag and replaced with a "mag" 100 rd spring from an m4 mag. It now fed perfectly in My Scar H. I then took the VFC spring and put it in my M4 mag- The M4 fed perfectly . Then to confirm that i wasn't crazy ..i switched them back. Again the VFC mag would not feed in the VFC Scar.

Anyone ever experience anything like this before? (the High cap feeds perfectly). I switched all the springs with M4 and G36 mag springs and all 3 mags now feed. All the cut VFC springs work fine in M4 and G36 mags... the bloody things just don't work in the magazine they were made for!

Snakebite1967 May 20th, 2010 15:48

A bud just purchased a tan Scar heavy and a 3 pack of Vfc mags all feed fine so far, does seem weird


All times are GMT -4. The time now is 01:42.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.