Looking for a 1911 INFO
 

Hey guys i'm looking for information on a chrome/silver 1911 GBB thats in metal or realistic plastic.

Any idea's? Iv been on UNC and WGC but just can't seem to find any... Am i stuck in having to buy a TM 1911 + a chrome frame and slide? If yes, recommend anything?

I'm looking for information basically.

Thx

Try a Para? Its essentially a 1911 with a double stack, and they're usually in chrome or silver. Search Para on either UNC or Redwolf

WA Hardballer?

Thx taking a look.

WA is the most realistic 1911 mfg around. Probably the PTW of 1911/2011s.

My WA 2011s function exactly like the RS, and have 10% RS parts commonality (requires mods, but not many) ...

WA is the one to look for if you want to buy to resemble a certain gun....TM is the one to buy if you want to make a project out of it....provided that you can track down the various kit for it in Canada....

How so? Don't all GBB's function pretty much like real handguns? :D

Ever try to decock a TM hicapa? lol

I can decock my KJW P229 :D

And you can decock/half cock WE 1911's.

Yeah, but you can't fit RS components on WEs.

Meh. Finish on both those makes are sub par.

you can go to half cock on TM Hi-Capa and 1911....and you can mod it to do full decock...

Really?

I'm very interested. If I can mod my Hicapa to do that, I'm aborting all my WA plans. Seriously. lol.

Where can i get this WA Hardballer... seems its sold out everywhere :(

for my reference, what is meant by "1911 mfg" i know what a 1911 is but mfg? lol

It's a very simple mod. Just a small nub needs to be filed down.

"Manufacturer"

Did the mod, lost the half cock feature.

Verdict: WA > TM in realism.

Duh :P TM isn't really known for realism anyways:rolleyes:

I've only had 2 TM guns. Hicapa (x2), and M4A1... Wasn't familiar with the ground.

I am not sure what you meant by lost the half cock feature. You can half cock the 1911/Hi-Capa with the stock pistol, you just can't go to full de-cock from cocked . With the mod you can, and there is no more half-cock. Can a WA do both?

What I meant to say is you lose the safety feature. You can fire the gun from halfcock, which is effin' stupid if you ask me. Meh.

Uhh... you're not suppose to be able to fire the gun from half-cock. I'm doing it to three Hi-Capas sitting in front of me right now, and none of them will drop the hammer on half-cock...

Anyways, I'm just confused as to what you refer to as the "safety feature" - what is this feature? Being able to fire from half-cock?

1911's have three safety features. (This excludes the Sig GSR, and other revamped versions of the 1911 )

Grip must be depressed, thumb safety must be inactive, and hammer must be cocked fully.

If either one of these isn't in order, the gun will not drop the hammer.

The halfcock was supposed to be a safety feature.

So the half cock happens on real guns as well? bahaha.. TM>WA.

but again, I can't get the gun to fire on any of my Hi-Capas in half-cock. I did have a Hi-Capa 4.3 in my hands at one point which could fire in half-cock, but only if the trigger was pulled with a LOT of pressure.

While I was reading up on the half-cock:

http://www.sightm1911.com/Care/1911_conditions.htm

pretty simply explained about the half-cock...

I have not done any full decock mod to my 1911 or Hi-Capa....I do have a stock hammer sitting around, maybe I'll give that a go....

Nope, WA > TM, as you're not supposed to be able to half-cock, AND fire. lol.

Anyway, I've crapped in this thread enough.

If anyone tries the mod, be aware of the fact that the gun WILL fire in halfcocked mode. So, either keep the hammer down, or leave your thumb safety on.

To much cock in this thread, back to topic please...

Still can't find a full metal chrome 1911 or a metal kit... all of them are ether silver or chrome plastic which is fugly.

Any idea's?

confirmed....once the mod is performed, the hammer will drop from half-cock....

you could probably refinish a silver to look mirror/chrome like, but being aluminum if you don't protected it it'll get scratched up and tarnished easily....

I think Guarder are releasing a chrome kit for the Detonic...maybe consider that? I know it's not a full size 1911 though....

http://www.intrudershop.com/show_pro...idproduct=1219

You could look into the Premium Edition WA Colt Government Mark IV Series 70 or the Premium Edition WA Colt Combat Commander Mark IV Series 80. I know there are at least a few of the latter in Ontario.

im still looking for a metal upgrade for my tm1911. no suck luck yet.